Your package of hanging strips should have two pairs of tabs. Remove the liner from one side of each set of strips.
Leaving the sets together, press a set into each of the upper corners of the chart.
Remove the other liner from both sets of strips and press onto the wall. Press each set firmly for 30 seconds.
Holding the bottom of the chart, slowly pull the chart away from the wall. One section of the pair of strips will stay on the wall, and the other will stay on the chart.
Press on all of the strips for another 30 seconds.
Wait one hour, and then press the chart back to the wall, making sure the sets snap back together.
TO REMOVE THE HANGING STRIPS
While pushing on the top of the strip, pull the tab on the bottom of the strip straight down slowly until it releases from the wall.